SCPH-15000 Version Information
2. The chassis (centre frame) of the 15000 has a small square cut out under the heat spreader/sink location to place/bridge a black conductive pad between a chip on the DVD logi...
Member
Member
Recent activity
2. The chassis (centre frame) of the 15000 has a small square cut out under the heat spreader/sink location to place/bridge a black conductive pad between a chip on the DVD logi...
Fixed. The issue was the Flat Flex Cable between the drive board and the motherboard. It had contact issues due to slight corrosion and probably miscommunicated the drive state.
I have a SCPH-10000 with a weird issue: It does not brake the spindle motor before ejecting. Even at maximum speed (that is: a PS2 CD/blue-disc game during startup), it immediat...
Heating up entire boards for fixing them is not a good idea, despite being very common. Short circuits can often be found using thermal imaging while the board is turned on... i...
I am having this problem just after trying to replace a laser head, how can I tell if the SF-DB11 is not compatible with my PSX drive, and how do I find a compatible laser? As I...
I found and fixed the issue in the meantime. I already wrote about in another forum, so I'll quote myself here: Totally forgot to mention that in the end this actually worked an...
@VILLAIN Would you mind updating [URL='https://playstationdev.wiki/ps2devwiki/index.php/Motherboards']this article with high resolution photos from both sides of GH-001 - GH-008...
I recently replaced a broken laser (Sanyo SF-DB11) in a DESR-7500. Before replacing the laser, discs were not recognized (except in PS2-mode when booted with FMCB), but the moto...